SB-900 Privolex™ is a slow-cure, 100% solids, polyurethane primer containing no VOC. SB-900 is a plural component product. Side A is an isocyanate and side B is a polyol mixed at a 1:1 ratio by volume. SB-900 can be catalysed and the reaction time becomes noticeably less resulting in a faster-setting primer, especially in hotter weather. This material should be warm during application to decrease viscosity for best results.

SB-900 was developed to provide a variable speed, ultra-low-viscosity primer for both porous and non-porous surfaces. Privolex™ penetrates deeply into porous surfaces creating excellent bond with low dry film thickness that reduces pin-holing effects caused by off-gassing and surface air displacements. Privolex™ contains no solvents and is therefore compatible with EPS foam board and moisture cure caulks. It is sprayable through plural component equipment, conventional airless equipment and can be batch-mixed and then roller-applied.

For technical documents such as MSDS, TDS, installation guides, spec writing tools, case studies and performance reports contact us or login at My SprayBuilt® Account. If you have not yet activated My SprayBuilt® Account to access these online resources please contact us or your local technical representative for the necessary information to get started.

SprayBuilt® Inc. | info@spraybuilt.com | call: 1-800-371-8665

Copyright © 2013 SprayBuilt Inc. All rights reserved.

  • SprayBuilt on Twitter
  • SprayBuilt on Facebook
  • SprayBuilt on YouTube