SC-907 ReactiSolve is a fast-set, reactivating pre-primer containing a series of solvents. SC-907 is a single component product. CAUTION - This material is flammable!

SC-907 ReactiSolve has been designed for use as a thin film sealer/primer. It is not intended to be applied as a coating, rather its purpose is to absorb into and completely saturate the surface of the polymer. The high rate of absorption into a substrate is due to the ultra low viscosity of the product and the high solvent content. SC-907 causes over-cured polymer membranes to become chemically active. This enhances the adhesion of subsequent coatings by creating a new temporary open-time for recoat.

Additionally SC-907 acts as a dehydrator removing moisture from the surface of the polymer. Once the excess solvents in SC-907 which cannot absorb further into the saturated surface evaporate, SC-914 Primaset should be applied as a secondary primer extending open time between the polymer surface and newly applied coatings. Reactisol is especially beneficial in the case of older, UV damaged or oxidized polymer surfaces.

For technical documents such as MSDS, TDS, installation guides, spec writing tools, case studies and performance reports contact us or login at My SprayBuilt Account. If you have not yet activated My SprayBuilt® Account to access these online resources please contact us or your local technical representative for the necessary information to get started.

SprayBuilt® Inc. | info@spraybuilt.com | call: 1-800-371-8665

Copyright © 2013 SprayBuilt Inc. All rights reserved.

  • SprayBuilt on Twitter
  • SprayBuilt on Facebook
  • SprayBuilt on YouTube